|
Gallery |


|
ADDITIONAL PRODUCTS |



|
Additional Information for FastTags |
|
|
|
For those of you who remember the Shrinky Dinks, these tags work the same way. 1. Heat the oven to 325 F (180 C) for 10 minutes. 2. During this pre-heat time practice writing, your pet's information on the picture provided 3. Place the Tag over the picture and trace the information on the Tag., use a Fine Pt Sharpie marker or pen available for purchase**note below 4. After the oven is fully heated, place the cardboard on a cookie sheet, then place the white paper on the cardboard (all supplied with the tag) 5. Heat for 1 minute. Carefully place the Fas Tag face up on the white paper, bake for 5 to 6 minutes. 6. The tag will curl, flop and then lay flat. 7. Remove from oven and let cool completely. Place the clear sticker over the printed area, attach the S-hook or O-ring (all supplied) and your done. **note: I found that I wanted a really nice script font instead of my handwriting. I used Word, and using the ruler and columns I measured the size of the Tag and then used Bold Type and printed out the information I wanted to use, then traced the Script onto the Tag. I also did 6 tags at one time and they came out Great. I use TWO TAGS on each of my dogs for different reasons. One of my dogs has seizures and I use the Medical Tag with my phone number and then I used the Blue Ribbon because to me there is no finer dog/companion/best friend! These tags are EASY and FUN for everyone. |